Filter
Top Products
Options
8-3
User's Manual
INSTALLING OPTIONS
After the color kit is installed, enter setup mode and make sure that
AUTOSEL is specified for the desired color selection mode. If
AUTOSEL is not specified, the printer will not follow the color
command from your software. The following five options are
provided. AUTOSEL is selected unless you change the color selection
mode.
AUTOSEL: Seven colors are printed by command.
BLACK: Black is printed regardless of commands.
YELLOW: Yellow is printed regardless of commands.
MAGENTA: Red is printed regardless of commands.
CYAN: Blue is printed regardless of commands.
For information on entering setup mode and specifying the color
selection, see the section Changing MENU1 and MENU2 Options in
Chapter 5.
Use the self-test function to check color printing independent of the
color command from your software. See the section Testing the
Printer (Offline) in Chapter 2.
#08 Chapter 8 2000.09.20, 2:41 PM3