Filter
Top Products
User's Manual
7-5
Trouble-
shooting
Table 7.2 Paper Handling Problems and Solutions (Cont.)
Problem Solution
Paper cannot be If you are using a double-bin adapter, open the
loaded or fed. front cover and make sure that the fourth stud
(continued). from the left on the printer bottom frame
projects.
Paper jams while Turn off the printer and remove the jammed
loading. paper. Remove any obstructions from the
paper path.
Make sure that the paper thickness lever is set
for the thickness of your paper. See Table 3.2 in
Chapter 3.
If you are using a cut sheet feeder, make sure
that the bin lever is set to the "CLOSED"
position. (The bin lever is on the left side of the
feeder.)
Make sure that the paper is not folded, creased,
or torn.
Reload the paper.
Paper jams while Turn off the printer and remove the jammed
printing. paper. Remove any obstructions from the
paper path.
Make sure that the paper thickness lever is set
for the thickness of your paper. See Table 3.2 in
Chapter 3.
For continuous forms, make sure that the
incoming and outgoing paper stacks are
correctly placed. Paper should feed straight.
TROUBLE-SHOOTING
#07 Chapter 7 2000.09.20, 2:40 PM5