Filter
Top Products
User's Manual
7-9
Trouble-
shooting
Table 7.3 Operating Problems and Solutions (Cont.)
The printer is on If you are using an RS-232C serial interface,
but it will not make sure that the serial settings required by
print (continued). your software or computer are the same as the
settings on the printer. See the section Chang-
ing Hardware Options in Chapter 5.
The cut sheet Make sure that the cut sheet feeder is firmly
feeder does not mounted on the printer.
operate.
Open the front cover and make sure that the
third stud from the left on the printer bottom
frame projects.
The double-bin Make sure that the double-bin adapter is firmly
adapter does not mounted behind the cut sheet feeder.
operate.
Open the front cover and make sure that the
fourth stud from the left on the printer bottom
frame projects.
Problem Solution
TROUBLE-SHOOTING
#07 Chapter 7 2000.09.20, 2:40 PM9