Filter
Top Products
8-2 User's Manual
INSTALLING OPTIONS
If you are using the forms tractor unit for bottom feeding, remove the
tractor unit and install it at the rear of the printer. To mount the cut
sheet feeder on your printer, remove the acoustic cover and the two
brackets from the separator (store them for future use). For details on
installing the feeder, refer to the manual shipped with the feeder.
For details on using your cut sheet feeder, see the section Loading
Paper in the Cut Sheet Feeder (Option) in Chapter 3.
You can turn your monochrome printer into a color printer by
installing a color kit on the print head carriage. The ribbon shift unit
of the color kit is shown below.
INSTALLING THE COLOR
KIT
Color kit (ribbon shift unit)
To install the color kit on your printer, cut off the cover from the print
head carriage. For details, refer to the instructions shipped with the
kit.
#08 Chapter 8 2000.09.20, 2:41 PM2