Filter
Top Products
Specifications
User's Manual
B-7
PRINTER AND PAPER SPECIFICATIONS
Print area for continuous forms
Print area
May be
decreased to
4.23 mm
(1/6 inch).
However, line
spacing may be
uneven.
Perforation
5.08 mm or more
(0.2 inch or more)
102 mm
(4 inches)
or more
Paper end
25.4 mm (1 inch)
Print area may be off the
paper, depending on
paper setting or width.
Print area
102-266.7 mm (4-10.5 in)
for 80-column printer
102–420 mm(4–16.5 in)
for 136-column printer
5.08-25.4 mm (0.2-1 in)
for 80-column printer
5.08–32 mm (0.2–1.3 in)
for 136-column printer
Approx. 80 mm (3.2 inches)
for push-tractor feed
Approx. 35 mm (1.4 inches)
for pull-tractor feed
25.4 mm (1 inch)
25.4 mm (1 inch)
Print head position when
paper end is detected,
selectable by setup mode.
Printing
resumable
Approx. 4.7 mm (0.18 inches):
Resume printing is allowable
to single-part paper only and
selectable by setup mode.
#B Appendix B 2000.09.20, 2:51 PM7