Filter
Top Products
USING SETUP MODE
User's Manual5-32
Table 5.4 HARDWRE Items and Options (Cont.)
NOTE: Underlined options are the factory defaults.
HARDWRE Options Description
Items
<BAUD-RT> 150 The baud rate is in bps (bits per
300 second). Select the same baud rate as
600 used by your computer or modem.
1200
2400
4800
9600
19200
<PROTOCL> Indicates data transmission protocol.
XON/XOF The DC1 and DC3 codes are used.
DTR
The Data Terminal Ready signal is used.
REV-CHL The Reverse Channel signal is used.
<DSR> IGNORE DSR is ignored by the printer.
DETECT DSR is detected by the printer.
<DUPLEX>
FULL Simultaneous data transmission occurs
in opposite directions.
HALF Data transmission occurs in either
direction, but not simultaneously.
<CTS> IGNORE CTS is ignored by the printer.
DETECT CTS is detected by the printer.
<CD> IGNORE CD is ignored by the printer.
DETECT CD is detected by the printer.
<CSFTYPE> Selection of cut sheet feeder type
ASF CSF made by BDT.
PAPRPRO CSF made by Rutis Hauser.
<==END==>
Indicates the end of the HARDWRE
item list. Press the FONT button to print
the first item, which is <PPR-OUT>.
Press the MENU button to print the
previous item. Press the ONLINE button
to reprint the <<FUNCTION>> menu.
#05 Chapter 5 2000.09.20, 2:37 PM32