Filter
Top Products
User's Manual
Paper
Handling
PAPER HANDLING
3-25
Switching to Single Sheets
To switch from continuous forms to single sheets:
1. Tear off your printed pages.
2. Retract the forms paper to the park position by pressing the
LOAD button. The PAPER OUT indicator turns red.
CAUTION
Failure to retract the forms paper will cause paper jams.
3. Move the paper select lever forward to the single sheet position.
4. Mount the cut sheet stand or cut sheet feeder. (For details, see
the section Using Single Sheets earlier in this chapter.) If you
are using the cut sheet stand, press the LOAD button to
advance the paper to the top-of-form position. If you are using
the cut sheet feeder, you cannot advance paper by the LOAD
button; only a command from the computer advances the paper
to the top-of-form position.
You are now ready to print using single sheets.
#03 Chapter 3 2000.09.20, 2:33 PM25