Fujitsu S300M Scanner User Manual


 
5.2 Saving Data in the Specified Folder
ScanSnap S300M Operator's Guide 97
About Actions
5
4. Click the close button in the upper left corner of the window.
The "ScanSnap Manager - Scan and Save Settings" window closes.
Operation
5. Load the document onto the ScanSnap.
6. Press the [SCAN] button .
Scanning is started.
When scanning is complete, the preview window appears.
Operation
7. Verify a scanned image in the preview window.
You can also change file names and destination folders and specify whether to state a path to a
destination folder in an e-mail message to notify other members of it.
Window size is scaled up or down by dragging the lower right corner of the "Scan to Folder"
window with the mouse cursor. The previewed image is also scaled up or down according to
the window size.
HINT
To start scanning right after selecting the profile, press the [SCAN] button
on the ScanSnap. Doing so also closes the "ScanSnap Manager - Scan
and Save Settings".
Changes you have made in the above procedure take effect from the next
time you scan documents using the profile.
For details on how to change settings, refer to "4.3 Saving Scanning
Settings" (page 70).
"Scan to Folder" profile can be selected by selecting "Scan to Folder" in the
"Select a Profile" window which pops up when clicking the ScanSnap
Manager icon .
For details, refer to "3.2 Paper Sizes of Documents to be Scanned" (page
39) and "3.3 Loading Documents" (page 41).