Fujitsu S300M Scanner User Manual


 
174
8.1 Cleaning the ScanSnap Exterior
Note 1: To purchase cleaning materials, contact the FUJITSU scanner dealer where you purchased
the ScanSnap.
Note 2: Pre-moistened with Cleaner F1, Cleaning Wipes are used instead of moistened cloths.
Note 3: Any lint-free cloth can be used.
Cleaning Materials Parts No. Remarks
Cleaner F1 PA03950-0352 1 bottle (100ml)
(*1)
Cleaning Wipe PA03950-0419 1 pack (24 sheets)
(*1) (*2)
Lint-free dry cloth Commercially available (*3)
ATTENTION
Never use paint thinner or other organic solvents.
During the cleaning, prevent water or moisture from getting inside the
ScanSnap.
Do not use aerosol sprays to clean the ScanSnap. Aerosol sprays cause dirt
and dust to enter the ScanSnap, resulting in ScanSnap failure and
malfunction, or errors in scanned images.
It may take long before the cleaner vaporizes if a large quantity is used. When
cleaning the ScanSnap parts, dampen a cloth with modest quantities of the
cleaner. In addition, wipe off the cleaner completely with a soft lint-free cloth to
leave no residue on the surface of the cleaned parts.
Cloth
Cleaner F1 or
neutral detergent
Paint thinner