Fujitsu S300M Scanner User Manual


 
6.1 Using ScanSnap Manager
ScanSnap S300M Operator's Guide 159
Using the ScanSnap in Various Ways
6
4. Click the [Apply] button.
5. Click the close button in the upper left corner of the window to close the window.
The "ScanSnap Manager - Scan and Save Settings" window is closed.
<Scanning business cards>
Operation
1. Load the document onto the ScanSnap and press the [SCAN] button .
Load the business cards face down.
When scanning more than one business card, set them together.
Adjust the side guides so that they are touching the edges of the business card.
Hold the tags of the side guides when moving them.
Scanning is started.
When scanning is complete, Cardiris window appears.
HINT
The following settings are recommended.
[Scanning] tab: [Color mode] set to "Color", [Image quality] set to "Best"
[Compression] tab: [Compression rate] set to "1".
The scanning of business cards can be also prepared by selecting
"Cardiris" in the "Select a Profile" window which pops up when the
ScanSnap Manager icon is clicked.
Paper chute
Business card
Side guide
[SCAN] button