GE 90-30 PLC Switch User Manual

Content of This Manual
Chapter 1. Introduction: Discusses the TCP/IP Ethernet Interface, its communications
capabilities, and generally how to get your system running. Also included
is a quick guide to the manual.
Chapter 2. Installing the TCP/IP Ethernet Interface: Describes the basic features of
the TCP/IP Ethernet Interface, the installation and power-up of the Inter-
face, and a procedure for the initial checkout of the Interface on your Ether-
net cable.
Chapter 3. Programming Communications Requests: Describes the ladder program-
ming necessary for communications between PLCs.
Chapter 4. Troubleshooting: Describes troubleshooting and problem isolation for the
Ethernet Interface.
Appendix A. Glossary of Terms
Appendix B. Communications Port Characteristics
Appendix C. Advanced Information About IP and MAC Addresses
Appendix D. Sample Ladder Program
Appendix E. PC Software loader
Related Publications
GFK-1186 TCP/IP Ethernet Communications for the Series 90 PLC Station Manager Manual
GFK-0356 Series 90 -30 Programmable Controller Installation Manual
GFK-0466 Logicmaster 90 Series 90 -30/20/Micro Programming Software User’s Manual
GFK-1295 Using CIMPLICITY Control
GFK-0467 Series 90 -30/20/Micro Programming Software Reference Manual
GFK-0870 Host Communications Toolkit for C/C++ Applications User’s Manual
GFK-1063 Host Communications Toolkit for Visual Basic Applications User’s Manual
GFK-1026 Host Communications Drivers for Microsoft
User’s Manual
We Welcome Your Comments and Suggestions
At GE Fanuc Automation, we strive to produce quality technical documentation. After
you have used this manual, please take a few moments to complete and return the
Reader’s Comment Card located on the next page.