Filter
Top Products
Zebra XiII Printer User’s Guide 33
Operation
described below. Pressing the left or right black oval key displays other
choices and pressing the Next/Save key selects the displayed choice.
•
- permanently saves the changes. Values are stored in the
printer even when power is turned off.
•
- saves the changes until changed again or until power is
turned off.
•
- cancels all changes since pressing the Setup/Exit key except
the Darkness and Tear-Off settings (if they were changed).
•
- loads factory defaults. The factory defaults are shown
on the following pages.
Note: Loading factory defaults will require Calibration and resetting the Head
Resistor value.
•
- loads values from the last Permanent Save.
xi2ch2 Page 33 Tuesday, April 23, 1996 1:45 PM