Filter
Top Products
Zebra XiII Printer User’s Guide 85
Specifications
Printing Specifications
Ribbon Specifications
Printing Specifications 90XiII 140XiII 170XiII 220XiII
Resolution
300 dots/
inch
12 dots/mm
203 dots/
inch
8 dots/mm
300 dots/
inch
12 dots/mm
203 dots/
inch
8 dots/mm
Dot size (Width
Length)
0.0033”
0.0039”
0.085
0.100 mm
0.0049”
0.0049”
0.125
0.125 mm
0.0033”
0.0039”
0.085
0.100 mm
0.0049”
0.0049”
0.125
0.125 mm
Maximum print width 3.42” 87 mm 5.04” 128 mm 6.61” 168 mm 8.50” 216 mm
Print length Maximum
Non-continuous
printing
With standard memory 20” 508 mm 30” 762 mm 10” 254 mm 16” 406 mm
With 9 MB memory 39” 991 mm 39” 991 mm 39” 991 mm 39” 991 mm
Continuous printing
With standard memory 20” 508 mm 30” 762 mm 10” 254 mm 18” 457 mm
With 9 MB memory 239” 6070 mm 353” 8966 mm 123” 3124 mm 209” 5308 mm
Bar code modulus (“X”) dimension 3.33 mil to 33.3 mil 5 mil to 50 mil 3.33 mil to 33.3 mil 5 mil to 50 mil
Thin-film printhead with Element Energy Equalizer (E
3
)
®
Yes Yes Yes Yes
Ribbon Specifications 90XiII 140XiII 170XiII 220XiII
Ribbon width (Zebra recommends using ribbon at least as wide as
the media to protect the printhead from wear.)
Minimum 0.79” 20 mm 1.57” 40 mm 2” 4.33” 110 mm
Maximum 3.54” 90 mm 5.31” 135 mm 6.89” 175 mm 8.66” 220 mm
Standard lengths
2:1 media to ribbon roll ratio 984 ft. 300 m 984 ft. 300 m 984 ft. 300 m 984 ft. 300 m
3:1 media to ribbon roll ratio 1476 ft. 450 m 1476 ft. 450 m 1476 ft. 450 m 1476 ft. 450 m
Ribbon core inside diameter 1.00” 25.4 mm 1.00” 25.4 mm 1.00” 25.4 mm 1.00” 25.4 mm
Maximum ribbon roll outside diameter 3.2” 81.3 mm 3.2” 81.3 mm 3.2” 81.3 mm 3.2” 81.3 mm
xi2ch6 Page 85 Tuesday, April 23, 1996 12:41 PM