Filter
Top Products
Zebra XiII Printer User’s Guide 77
Options
Zebra On-Line Verifier
The Zebra On-Line Verifier is an external device that provides the means to
automatically scan and analyze certain bar code symbols as they are printed.
If the verifier detects a problem with the bar code, it will automatically
pause the printer. The operator must then correct the problem and take the
printer out of pause mode before printing will resume.
Several operational modes are available, ranging from simple freescan to
one where specific symbology and data is required.
Applicator Interface
The Applicator Interface is an ideal method of integrating XiII printers into
custom applications. This interface allows printer control from a personal
computer or Programmable Logic Controller (PLC) via one cable attached
to a connector located at the rear of the printer. This provides the capability
of placing the XiII printers on a production line in a loose loop, print and
apply configuration, or other applications where the printer must be con-
trolled by a machine.
Media Supply Spindle
The optional Media Supply Spindle replaces the standard hanger. This is
useful for applications that require the printer to be mounted in a non-hori-
zontal position where the standard media hanger prohibits consistent media
flow.
xi2ch5 Page 77 Tuesday, April 23, 1996 12:36 PM