Filter
Top Products
Zebra XiII Printer User’s Guide 43
Operation
Format Prefix Character Press the left oval key to move to the next digit position, press the
right oval key to increase the value of the digit.
Default: 5E (caret) Range: 00 - FF (Exclude the values indicated on the ASCII Code Chart in
the Appendix.)
The printer looks for this 2-digit hex character to indicate the start of a ZPL/ZPL II format instruc-
tion.
Delimiter Character Press the left oval key to move to the next digit position, press the right
oval key to increase the value of the digit.
Default: 2C (comma) Range: 00 - FF
The Delimiter character is a 2-digit hex value used as a parameter place marker in ZPL/ZPL II for-
mat instructions. Refer to the ZPL II Programming Guide for more information.
Selecting ZPL Mode
Selecting ZPL Mode Press the right or left oval key to display other choices.
Default: ZPL II Selections: ZPL II, ZPL
The printer will remain in the selected mode until it is changed by this front panel instruction or by
using a ZPL/ZPL II command. The printer accepts label formats written in either ZPL or ZPL II .
This eliminates the need to rewrite any ZPL formats you already have. Refer to the ZPL II Pro-
gramming Guide for more information on the differences between ZPL and ZPL II .
xi2ch2 Page 43 Tuesday, April 23, 1996 1:45 PM