Filter
Top Products
24 Scanning from scanner buttons Back to TOC
&KDQJLQJVHWWLQJVIRUEXWWRQV
When you use the scanner buttons, the scanner scans the item using
settings optimized for the destination, such as e-mail, that is
associated with that button. Settings are applied to all items being
scanned until you change the settings again.
7LS
To change the settings only for the current item, you may
want to scan using the HP PrecisionScan Pro software
instead. See Scanning from HP PrecisionScan Pro
(starting on page 31).
7RFKDQJHVHWWLQJVIRUEXWWRQV
1 Do one of the following:
● On the scanner, press MORE OPTIONS (if present).
● On the Start menu, point to Programs, point to HP ScanJet
Utilities, and click HP ScanJet Button Options.
2 Click the tab for the button you want. The box in the middle of the
tab contains the settings that can be changed.
3 Select a setting and click Modify.
4 Change the setting and click OK. See "List of options for scanner
buttons" on page 25 for more information.
5 Repeat steps 3 and 4 to change any other settings for this button.
6 Repeat steps 2 through 5 to change settings for another button.
7 When finished, click Close.