Filter
Top Products
78 Sharing the scanner on a network Back to TOC
(QDEOLQJVKDULQJRQWKHUHPRWHFRPSXWHU
After installing the software on the remote computer, enable sharing on
that computer.
7RVHWXSVFDQQHUVKDULQJRQDUHPRWHFRPSXWHU
1 On the Start menu, point to Programs, point to HP ScanJet
Utilities, and click Remote Scanning Setup.
2 In the Remote Setup dialog box, select the Use Remote Scanner
check box.
3 Specify the name of the computer where the scanner is installed
(host computer).
4 Enter the password (if used) for the host computer.
5 Ensure that a matching network protocol is selected. This
information is found in the HP PrecisionScan LAN dialog box on
the host computer.
6 Click OK.
7 Repeat steps 1 through 6 to enable sharing on other remote
computers.
6FDQQLQJIURPDUHPRWHFRPSXWHU
Using the scanner is easy from a remote computer. Only one user at a
time can use the scanner. Also, the HP ScanJet Copy Utility is not
available.
7RVFDQIURPWKHUHPRWHFRPSXWHU
1 Place the original item face down on the scanner glass and close
the lid.
2 On the remote computer, start the HP PrecisionScan Pro software.
3 If prompted, enter the password. The person whose computer is
connected to the scanner sets the password.
4 Start scanning. If you need help with scanning procedures, see
"Scanning from HP PrecisionScan Pro" on page 31.