Filter
Top Products
3. Disconnect two connectors (callout 1), release the cables (callout 2) from the cable guide, remove
the C-clip (callout 3) from the clutch shaft, and then pull the upper cassette pickup clutch (callout 4)
to remove it from the product.
Figure 1-141 Remove the upper cassette pickup assembly (2 of 4)
2
4
3
1
Lower cassette pickup clutch
1. Remove the following components or assemblies:
●
Rear cover. See
Rear cover on page 13.
●
Formatter cage. See
Formatter cage assembly on page 52.
●
Right rear cover. See
Right rear cover on page 12.
●
Tray 1 (multipurpose tray) cover. See
Tray 1 (multipurpose tray) cover on page 17.
●
Right door. See
Right door on page 18.
ENWW
Motors, fans, and clutches
91