Filter
Top Products
Paper deck lifter-drive assembly
This procedure describes removing the paper deck cassette 1 lifter-drive assembly. Use this procedure
for any of the paper deck lifter assemblies.
1. Remove the paper deck rear cover. See
Paper deck rear cover on page 124.
2. Disconnect two connectors (callout 1).
Figure 1-191 Remove the paper deck lifter-drive assembly (1 of 2)
1
3. Remove all of the cassettes, remove three screws (callout 1), release one tab (callout 2), and then
remove the cassette lifter assembly (callout 3).
Figure 1-192 Remove the paper deck lifter-drive assembly (2 of 2)
3
2
1
ENWW
Trays
127