Filter
Top Products
1x500 driver PCA
1. Remove the cassette from the feeder, and then remove the rear cover (see 1x500 rear cover
on page 101).
2. Disconnect seven connectors (callout 1), remove two screws (callout 2), release two tabs (callout
3), and then remove the 1x500 driver PCA.
NOTE: One connector (callout 4) on the 1x500 driver PCA remains empty.
Figure 1-175 Remove the 1x500 driver PCA
3
2
1
4
114 Chapter 1 Removal and replacement ENWW