Filter
Top Products
Transfer roller
1. Open the toner cartridge door.
2. On the right end of the roller, pull up on the tab (callout 1) to loosen the roller (callout 2), and then
remove the roller from the product.
Figure 1-59 Remove the transfer roller
2
1
Paper feed assembly
1. Remove the following components or assemblies:
●
Fuser. See
Fuser on page 32.
●
Registration assembly. See
Registration assembly on page 37.
●
Transfer roller. See
Transfer roller on page 40.
40 Chapter 1 Removal and replacement ENWW