Filter
Top Products
4. Beneath the paper feed assembly (callout 1), remove the connector cover (callout 2) by pulling the
rear part of the cover up and toward you to release the front part of the cover.
Figure 1-62 Remove the paper feed assembly (3 of 4)
1
2
Reinstallation tip When reinstalling the connector cover, insert the front side (callout 1) first,
and then press down on the rear end (callout 2) of the cover to snap it in place.
Figure 1-63 Reinstall the connector cover
1
2
42 Chapter 1 Removal and replacement ENWW