●
HCI rear cover. See
HCI rear cover on page 134.
●
HCI left tray pickup drive. See
HCI left tray pickup drive on page 140.
2. Disconnect three connectors (callout 1) and remove one screw (callout 2).
Figure 1-222 Remove the HCI left tray pickup assembly (1 of 2)
2
1
3. Remove one screw (callout 1), and then remove the left tray pickup assembly (callout 2).
Figure 1-223 Remove the HCI left tray pickup assembly (2 of 2)
2
1
TIP: When removing the screw (callout 1), hold the left tray pickup assembly (callout 2) so that
you do not drop the screw.
146 Chapter 1 Removal and replacement ENWW