Filter
Top Products
2. Turn the two latches (callout 1) in the direction indicated, and then pull the fuser (callout 2) straight
out to remove it from the product.
Figure 1-46 Remove the fuser
2
1
NOTE: On the right side latch, you must reach behind the fuser door retainer to gain access to
the latch.
Control panel assembly
1. Remove the front cover. See Front cover on page 11.
2. Remove the USB cap (callout 1), remove two screws (callout 2), and then pull the control panel
(callout 3) away from the product.
Figure 1-47 Remove the control panel (1 of 2)
2
3
1
ENWW
Main assemblies
33