Filter
Top Products
Tray 1 (multipurpose tray) cover
1. Remove the right rear cover. See Right rear cover on page 12.
2. Open Tray 1.
3. Inside Tray 1, release two pins (callout 1), and then raise the cover to a half-closed position.
Figure 1-22 Remove the Tray 1 (multipurpose tray) cover (1 of 2)
1
4. Pull the right side hinge slot (callout 1) away from the hinge pin (callout 2), and then remove the
cover (callout 3) from the product.
Figure 1-23 Remove the Tray 1 (multipurpose tray) cover (2 of 2)
2
1
3
ENWW
Covers and doors
17