Filter
Top Products
2. Remove one screw (callout 1), release one tab (callout 2), and then remove the cover (callout 3)
from the product.
Figure 1-20 Remove the front right lower cover
1
2
3
Face-down cover
1. Open the toner cartridge door.
2. At the front of the product, remove one screw (callout 1), release one tab (callout 2) at the back of
the metal rail under the cover, and then lift the left side of the cover to release 3 tabs on the rear
side (callout 3) of the cover to remove the cover from the product.
Figure 1-21 Remove the face-down cover
3
2
1
TIP: When you reinstall the face-down cover, make sure that the three tabs (callout 3) are
properly inserted in the paper delivery assembly.
16 Chapter 1 Removal and replacement ENWW