Filter
Top Products
Printed circuit-board assemblies (PCAs)
Formatter PCA
The formatter is located in the right rear corner of the product. You do not need tools to remove it.
1. Locate the formatter and turn two thumb-screws (callout 1) counterclockwise to detach the formatter
base plate from the chassis.
Figure 1-144 Remove the formatter (1 of 2)
1
2. Pull the formatter away from the product to remove it.
Figure 1-145 Remove the formatter (2 of 2)
ENWW
Printed circuit-board assemblies (PCAs)
93