Filter
Top Products
Fuser drive assembly
1. Remove the front cover. See Front cover on page 11.
2. On the front side of the product, disconnect six connectors (callout 1), remove the ground wire
(callout 2), and then release the cables (callout 3) from the cable guide.
Figure 1-97 Remove the fuser drive assembly (1 of 3)
1 1
3
3
2
3. Remove three screws (callout 1), and then remove the fan holder (callout 2) from the product.
Figure 1-98 Remove the fuser drive assembly (2 of 3)
2
1
64 Chapter 1 Removal and replacement ENWW