2. Disconnect all of the connectors on the HCI controller PCA, remove four screws (callout 1), release
two tabs (callout 2), and then remove the HCI controller PCA (callout 3).
Figure 1-217 Remove the HCI controller PCA
2
3
1
1
HCI left tray automatic close assembly
1. Remove the following components or assemblies:
●
HCI left tray. See
HCI left tray on page 131.
●
HCI left cover. See
HCI left cover on page 132.
●
HCI rear cover. See
HCI rear cover on page 134.
2. Disconnect one connector (callout 1).
Figure 1-218 Remove the HCI left tray automatic close assembly (1 of 2)
1
ENWW
Input devices
143