Filter
Top Products
●
Control panel. See
Control panel assembly on page 33.
●
Rear cover. See
Rear cover on page 13.
●
Top rear cover. See
Top rear cover on page 25.
●
Left upper cover. See
Left upper cover on page 26.
2. Open the toner cartridge door.
3. On the front side of the product, disconnect one connector (callout 1) on the control panel PCA.
Figure 1-41 Remove the face-down upper cover (1 of 2)
1
4. Release the cables from the cable guides (callout 1), release two tabs (callout 2), and then slide
the cover (callout 3) in the direction indicated to remove it from the product.
Figure 1-42 Remove the face-down upper cover (2 of 2)
3
1
2
ENWW
Covers and doors
29