Filter
Top Products
Menu item Sub-menu item Sub-menu item Description
Dial Prefix On
Off*
Specifies a prefix number that must be dialed when sending faxes
from the product. If you turn this feature on, the product prompts
you to enter the number and then it automatically includes that
number every time you send a fax.
Advanced Setup Fax Resolution Standard
Fine*
Superfine
Photo
Sets the resolution for sent documents. Higher resolution images
have more dots per inch (dpi), so they show more detail. Lower
resolution images have fewer dots per inch and show less detail,
but the document size is smaller and the fax takes less time to
transmit.
Lighter/Darker Sets the darkness of outgoing faxes.
Fit to Page On*
Off
Shrinks incoming faxes that are larger than the paper size set for
the tray.
Glass Size Letter
A4
Sets the default paper size for documents being scanned from the
flatbed scanner.
Dialing Mode Tone*
Pulse
Sets whether the product should use tone or pulse dialing.
Redial if Busy On*
Off
Sets whether the product should attempt to redial if the line is
busy.
Redial if No Answer On
Off*
Sets whether the product should attempt to redial if the recipient
fax number does not answer.
Redial if Comm. Error On*
Off
Sets whether the product should attempt to redial the recipient fax
number if a communication error occurs.
Detect Dial Tone On
Off*
Sets whether the product should check for a dial tone before
sending a fax.
Billing Codes On
Off*
Enables the use of billing codes when set to On. A prompt
displays where you can enter the billing code for an outgoing fax.
Extension Phone On*
Off
When this feature is enabled, you can press the 1-2-3 buttons on
the extension phone to cause the product to answer an incoming
fax call.
Stamp Faxes On
Off*
Sets the product to print the date, time, sender's phone number,
and page number on each page of incoming faxes.
142 Chapter 2 Solve problems ENWW