Filter
Top Products
Change the fax speed
The fax-speed setting is the modem protocol that the product uses to send faxes. It is the worldwide
standard for full-duplex modems that send and receive data across telephone lines at up to 33,600 bits
per second (bps). The factory-set default for the fax-speed setting is Fast (V.34).
You should change the setting only if you are having trouble sending a fax to or receiving a fax from a
particular device. Decreasing the fax speed might be useful when you are trying to send a fax
overseas, or receive one from overseas, or if you are using a satellite telephone connection.
1.
Touch the Setup
button.
2. Open the Fax Setup menu.
3. Open the Advanced Setup menu.
4. Open the Fax Speed menu, and then touch the speed setting that you want to use.
Solve problems sending faxes
●
An error message displays on the control panel
●
The control panel displays a Ready message with no attempt to send the fax
●
The control panel displays the message "Storing page 1" and does not progress beyond that
message
●
Faxes can be received, but not sent
●
Unable to use fax functions from the control panel
●
Unable to use speed dials
●
Unable to use group dials
●
Receive a recorded error message from the phone company when trying to send a fax
●
Unable to send a fax when a phone is connected to the product
An error message displays on the control panel
The Communication error. message displays
●
Allow the product to retry sending the fax. Re-sending temporarily reduces the fax speed.
●
Unplug the product telephone cord from the wall, connect a telephone, and try making a call.
Connect the product phone cord into a jack for another phone line.
If the product is connected to a digital phone line, verify that you are using the correct filter and
settings provided by the digital service provider.
●
Try a different phone cord.
ENWW
Solve fax problems
227