Filter
Top Products
2. Lower the Tray 1 paper pickup assembly by pushing down on the edges of the assembly.
Figure 1-12 Remove the Tray 1 pickup roller (1 of 3)
3. Carefully raise the front of the product.
WARNING! Do not place the product face-up resting on the rear cover and rear door. Excess
toner might enter the laser/scanner assembly and contaminate the mirrors, causing print-quality
problems. The laser/scanner is not a FRU. If the laser/scanner mirrors are contaminated, the entire
product must be replaced.
CAUTION: The document feeder and scanner cover are not captive and can open suddenly
when the product is placed front-side face up. Always support the document feeder and scanner
cover before placing the product front-side face up.
CAUTION: Do not lift the product grasping the front door and Tray 2 cavity.
Figure 1-13 Remove the Tray 1 pickup roller (2 of 3)
18 Chapter 1 Removal and replacement ENWW