Filter
Top Products
Service menu
In the following table, items that have an asterisk (*) indicate the factory default setting.
Menu item Sub-menu item Sub-menu item Description
Fax Service Clear Saved Faxes Clears all faxes in memory.
Run Fax Test Performs a fax test to verify that the phone cord is plugged
in the correct outlet and that there is a signal on the phone
line. A fax test report is printed indicating the results.
Print T.30 Trace Now
Never*
If Error
At End of Call
Prints or schedules a report that is used to troubleshoot fax
transmission issues.
Error Correction On*
Off
The error correction mode allows the sending device to re-
transmit data if it detects an error signal.
Fax Service Log The fax service log prints out the last 40 entries in the fax
log.
Cleaning Page Cleans the product when specks or other marks appear on
printed output. The cleaning process removes dust and
excess toner from the paper path.
When selected, the product prompts you to load plain Letter
or A4 paper in Tray 1. Touch the OK button to begin the
cleaning process. Wait until the process completes. Discard
the page that prints.
NOTE: For models that do not have an automatic
duplexer, the product prints the first side and then prompts
you to remove the page from the output bin and reload it in
Tray 1, keeping the same orientation.
USB Speed High*
Full
Sets the USB speed for the USB connection to the computer.
For the product to actually operate at high speed, it must
have high speed enabled and be connected to an EHCI
host controller that is also operating at high speed. This
menu item also does not reflect the current operating speed
of the product.
Less Paper Curl On
Off*
When printed pages are consistently curled, this option sets
the product to a mode that reduces curl.
Archive Print On
Off*
When printing pages that will be stored for a long time, this
option sets the product to a mode that reduces toner
smearing and dusting.
Firmware
Datecode
Displays the current firmware datecode
ENWW
Troubleshooting tools
149