Filter
Top Products
Installing the front panel I/O cable assembly
To install he front panel I/O cable assembly:
1. With power removed and the chassis open, guide the front panel I/O cable assembly cables through
the chassis openings from which they were removed.
2. Place the front panel I/O cable assembly in the chassis and slide it up into position as shown in the
following figure
. Install the screw
2
.
Figure 5-18 Installing the front panel I/O cable assembly
3. Connect the front panel I/O cable assembly cables to the system board as shown in the following
figure.
Figure 5-19 Connecting the front panel I/O cable assembly cables
Table 5-5 Connecting the front panel I/O cable assembly cables
Item Description
1 Front audio
2 Front 1394a
3 Front USB
88 Chapter 5 Replacing components ENWW