Filter
Top Products
Heading Option Description
Chipset/
Memory
Enable/disable these options:
●
PCI SERR# Generation (Enable or Disable)—Controls PCI SERR# generation for ill-behaved
PCI add-in cards (that can generate SERR# spuriously).
●
PCI VGA Palette Snooping (Enable or Disable)—Controls PCI VGA Palette Snooping for
compatibility purposes.
●
Memory Mode Interleave—Sets interleave mode for dual socket workstations.
●
NUMA Split Mode (Enable or Disable)—Provides enhanced memory performance by
increasing memory operation speed. Enable this option for Windows, and disable it for Linux.
(This option is not available on all workstations or configurations.)
●
Enhanced Memory Performance (Enable or Disable)—Runs DIMMs at a higher frequency on
certain configurations and platforms.
Device Options Enables you to set the following device options:
●
Num Lock State at Power-On (On or Off)
●
S5 Wake-on-LAN (Enable or Disable)
●
Multiprocessor (Activates a single core.)
●
Unique Sleep State Blink Rates (Enable or Disable)
●
Internal speaker
●
Monitor Tracking (Enable or Disable)
●
NIC PXE Option ROM
1
Download (Enable or Disable)
●
SAS Option ROM
1
Download (Enable or Disable) (Not available on some workstations.)
●
SATA RAID Option ROM
1
Download (Enable or Disable)
HP Z800 Workstation PCI slots
Slot 1 - PCIe2 x8
(4)
Slot 1 option ROM download (Enable or Disable)
Slot 2 - PCIe2
x16
Slot 2 option ROM download (Enable or Disable)
Slot 3 - PCIe x8
(4)
Slot 3 option ROM download (Enable or Disable)
Slot 4 - PCIe2
x16(8)
Slot 4 option ROM download (Enable or Disable)
Slot 5 - PCIe2
x16
Slot 5 option ROM download (Enable or Disable)
Slot 6 - PCI
32/33
Slot 6 option ROM download (Enable or Disable), and latency timer and speed
Slot 7 - PCIe2
x16(8)
Slot 7 option ROM download (Enable or Disable), and latency timer and speed
HP Z600 PCI slots
Table 4-1 Computer Setup (F10) Utility menu descriptions (continued)
40 Chapter 4 System management ENWW