Filter
Top Products
Installing the DIMM
NOTE: For best performance add DIMMs of the same size in pairs across CPUs.
1. Disconnect power from the workstation (see Predisassembly procedures on page 73).
2. Remove the side access panel (see
Removing the side access panel on page 75).
3. Remove the airflow guide (see
Removing the airflow guide on page 76).
4. Remove the memory fans (see
Removing the memory fans on page 136).
5. Push outward on the DIMM socket levers as shown in the following figure.
Figure 5-91 Opening DIMM socket levers
142 Chapter 5 Replacing components ENWW