Filter
Top Products
Memory fans
This section describes how to remove and install the memory fans.
Removing the memory fans
1. Disconnect power from the workstation (see Predisassembly procedures on page 73).
2. Remove the side access panel (see
Removing the side access panel on page 75).
3. Remove the airflow guide (see
Removing the airflow guide on page 76).
4. Grasp the sides of the memory fan assembly
and press the memory fan assembly release tabs
2
with your index fingers as shown in the following figure.
Figure 5-85 Releasing the memory fan assembly
5. Lift the memory fan assembly upward, out of the chassis as shown in the following figure.
Figure 5-86 Removing the memory fan assembly
136 Chapter 5 Replacing components ENWW