Filter
Top Products
Hard disk drive
This workstation accommodates both SAS and SATA hard drives.
Both 3.5 in. standard hard disk drives or 2.5 in. small form factor (SFF) hard disk drives may be installed
in the workstation.
NOTE: A 2.5 in. hard drive must be mounted in a 3.5 in. adapter before it can be installed in the chassis
blind-mate carrier.
Hard disk drives can be installed in the hard drive bay and the optical drive bay. Drives should be installed
in the hard drive bay first, then in the optical drive bay. Installation in the optical drive bay requires an
optional adapter kit.
The hard drives blind-mate (direct-connect) to chassis mounted connectors, so manual cable
connections may be avoided.
This section includes these topics:
Topic
Removing a hard disk drive from the hard drive bay on page 106
Installing a hard disk drive in the hard drive bay on page 107
Removing a hard disk drive from the slot load optical bay on page 111
Installing a hard disk drive in the slot load optical bay on page 115
Removing a hard disk drive from the optical drive bay on page 119
Installing a hard disk drive in the optical drive bay on page 121
Installing dual SFF hard drives in the optical drive bay on page 123
ENWW Removing and installing components 105