Filter
Top Products
2. Connect the rear system fan assembly cable to the system board as shown in the following figure.
Figure 5-78 Connecting the rear system fan assembly cable
3. Reassemble the workstation, and then replace the side access panel.
Installing a second front system fan
1. Remove the expansion card guide/front fan holder (see Removing the expansion card guide/front
fan holder on page 126).
2. Orient the front system fan so that the fan label points into the expansion card guide/front fan holder.
Figure 5-79 Orienting the fan in the fan holder
132 Chapter 5 Replacing components ENWW