Filter
Top Products
28 | HP Jornada 600 Series Users Guide
There are many Windows CE programs available, including freeware and shareware. Go to
www.microsoft.com/windowsce, or try searching the Web on the keyword Windows CE to
find additional programs for your HP Jornada. Be sure to install only programs that are
compiled for SH3 processors.
Installing Windows CE Services
The minimum PC requirements for running Windows CE Services are as
follows:
• Desktop PC with a 486/33DX or higher processor (Pentium® P90 recom-
mended)
• Microsoft Windows NT Workstation 4.0 or Windows 95 (or later)
• 8 MB of memory (12 MB recommended) for Windows 95 (or later), and 16
MB of memory (32 MB recommended) for Windows NT Workstation
• Hard disk drive with 10 to 50 MB of available hard disk space (actual
requirements will vary, based on selection of features and current system
configuration)
• Available 9-pin serial communications port
• CD-ROM drive
• VGA or higher resolution graphics card (SVGA 256-color recommended)
To install Windows CE Services
1. Insert the Desktop Software for Microsoft Windows CE compact
disc into the CD-ROM drive on your desktop PC.
2. The Windows CE Services Setup Wizard should start automatically.
If it does not start, click Run on the Start menu, and then type
d:\setup, where d is the letter assigned to your CD-ROM drive.
3. Follow the instructions that appear on your screen to set up Win-
dows CE Services, and then restart your desktop PC.
4. After you restart your PC, the Windows CE Services Get Connected
dialog box appears, prompting you to connect your HP Jornada.
• If you connect using the docking cradle or sync cable, connect
your device as described in the next section, Connecting by serial
connection, and then click Start.
• If you connect by infrared, click Cancel, and then skip to the
section Connecting by infrared, later in this chapter.