Filter
Top Products
Chapter 3 | Connecting to your desktop PC | 35
To configure Windows CE Services for infrared connection
1. Insert the Desktop Software for Microsoft Windows CE compact
disc into the CD-ROM drive on your desktop PC, and then run
Setup.exe.
2. Click Optional Components, and then select the Windows 95
Communications Driver setup program.
3. When the setup program prompts you to specify a communications
port, select a virtual port (typically COM3).
4. When setup is complete, restart your desktop PC, and then open the
Mobile Devices window.
5. In the Mobile Devices window, click Communications on the File
menu.
6. Under Port, select the infrared port you installed when you set up
the infrared device.
–or–
Click New to install the port. (If you install a new port, you may need
to reinstall Windows CE Services.)
To configure your HP Jornada for infrared connection
1. On your HP Jornada Start menu, point to Settings, tap Control
Panel, and then double-tap the Communications icon.
2. On the PC Connection tab, if it does not say Connect using Infrared
Port, tap Change, and then select Infrared Port from the list of
available connections.
To establish an infrared connection
1. Line up the infrared port on your HP Jornada with the infrared device
on your notebook or desktop PC.
2. On your HP Jornada Start menu, point to Programs, point to
Communications, and then tap PC Link.
Connecting to another PC
In some cases, you may need to connect your HP Jornada to a desktop PC
other than your partner. Or, if you have logged on to your desktop PC under
a different user name or performed a full reset of your H/PC, your desktop PC
will not recognize your HP Jornada as its partner.