Filter
Top Products
34 | HP Jornada 600 Series Users Guide
To enable automatic connection
1. On the desktop PC Start menu, point to Programs, point to
Microsoft Windows CE Services, and click Mobile Devices.
2. On the File menu in the Mobile Devices window, click
Communications.
3. Under Device Connections via Serial Port, click Enable Auto
Connect.
If you use the COM port of your desktop PC for other devices, or if you have
disconnected your HP Jornada and need to re-establish the connection, you
can establish a manual connection using the PC Link program on your
HP Jornada.
To connect manually
1. On the HP Jornada Start menu, point to Programs, point to Commu-
nications, and then tap PC Link. The Connection Status dialog box
appears. After a few moments a sound indicates that the connection
has been established.
To close the connection
1. On your HP Jornada, double-tap the connection icon in the status
area of the task bar.
2. In the Connection Status dialog box, tap Disconnect.
Connecting by infrared
You can use the infrared port on your HP Jornada to connect to a desktop or
notebook PC that is running Windows 95 (or later). Once connected, you can
transfer files and synchronize Pocket Outlook data and e-mail messages just
as if you had connected using a sync cable or a docking cradle.
Before you can connect by infrared, you must set up and configure an
infrared port on your desktop or notebook PC. Many notebook PCs have a
built-in infrared port; however, you may need to install a third-party infrared
transceiver on your desktop PC. For more information about installing and
configuring that device for use with your desktop PC, refer to the instruc-
tions that came with your infrared port.
The Desktop Software for Microsoft Windows CE compact disc also includes
infrared device drivers for Windows 95.