Filter
Top Products
Chapter 5 Problem Solving 238
Understanding Printer Messages
RAM DISK FILE
OPERATION FAILED
The requested operation could not be performed. You might have
attempted an illegal operation, such as trying to download a file to
a non-existent directory.
RAM DISK FILE
SYSTEM IS FULL
Delete files and then try again, or turn the printer off, and then turn
the printer on to delete all files on the device. (Delete files using
HP LaserJet Resource Manager or another software utility. See the
software help for more information.)
If the message persists, increase the size of the RAM disk. Change
the RAM disk size from the Configuration Menu in the printer’s
control panel (page 445
).
RESEND UPGRADE There is an error in the printer’s firmware flash. Resend a valid
firmware image.
STAPLER LOW
ON STAPLES
The stapler device is running out of staples and needs to be
refilled.
STAPLER OUT OF
STAPLES
The stapler device is out of staples and needs to be reloaded.
TONER LOW See page 194
.
Printer Messages (continued)
Message Explanation or Recommended Action