Filter
Top Products
Chapter 5 Problem Solving 303
Correcting Output Quality Problems
Connection cannot be
established or seems to
take longer than usual.
! Use a device that is IRDA-compliant; look for an IRDA
symbol on the device or see the computer’s user guide for
IRDA specifications.
! Make sure that the operating system on your computer
includes an FIR driver and your application uses a
compatible driver. (Note that complex pages take longer to
print.)
! Position the HP Fast InfraRed Connect within the range of
operation described in Printing a Job
on page 182, and
make sure that no object is blocking the connection. (This
object could be a hand, paper, books, or even bright light.)
! Make sure that the two FIR ports are clean (free from dirt
and grease).
! Bright light of any kind (sunlight, incandescent light,
fluorescent light, or light from an infrared remote control,
such as those used for TVs and VCRs) shining directly into
one of the FIR ports might cause interference. Make sure
that no bright light is shining directly into either FIR port.
! Position the portable device closer to the FIR port on the
printer.
HP Fast InfraRed Connect Problems (continued)
Situation Solution