Filter
Top Products
Chapter 5 Problem Solving 252
Understanding Printer Messages
68 NVRAM ERROR
CHECK SETTINGS
An error occurred in the printer’s nonvolatile memory (NVRAM) and
one or more printer settings has been reset to its factory default.
Print a configuration page and check the printer settings to
determine which values have changed (page 314
).
If this message persists, contact an HP-authorized service or
support provider. (See the HP Customer Care
pages at the front of
this user guide.)
68 NVRAM FULL
CHECK SETTINGS
The printer’s nonvolatile memory (NVRAM) is full. Some settings
might have been reset to the factory defaults.
Print a configuration page and check the printer settings to
determine which values have changed (page 314
).
Hold down C
ANCEL
J
OB
while turning the printer on. This will clean
up the NVRAM by removing old areas that are not being used.
If this message persists, contact an HP-authorized service or
support provider. (See the HP Customer Care
pages at the front of
this user guide.)
Printer Messages (continued)
Message Explanation or Recommended Action