Filter
Top Products
Chapter 5 Problem Solving 296
Correcting Output Quality Problems
Printer does not
recognize the Optional
Envelope Feeder.
! Turn the printer off, remove and re-install the Optional
Envelope Feeder, then turn the printer back on.
! Make sure the Optional Envelope Feeder has been
configured in the printer driver. See page 66
for more
information on accessing the printer driver.
Printer Hard Disk
Situation Solution
Printer does not
recognize the hard disk.
Turn the printer off and verify that the hard disk is inserted
correctly and is securely fastened.
Disk is not initialized.
DISK x NOT
INITIALIZED
Use the Windows-based HP LaserJet Resource Manager or
the Macintosh-based HP LaserJet Utility to initialize the disk.
Disk failure.
EIO x DISK
NOT FUNCTIONING
Turn the printer off and make sure that the EIO disk is
inserted correctly and securely fastened. If the control panel
message continues to be displayed, the disk drive needs to
be replaced.
Problems with the Optional Envelope Feeder (continued)
Situation Solution