Filter
Top Products
Appendix C Printer Memory and Expansion 475
Checking Memory Installation
Checking Memory Installation
Follow this procedure to verify that DIMMs are installed correctly:
1 Check that the printer’s control panel displays READY when the printer is
turned on. If an error message appears, a DIMM might have been
incorrectly installed. Check the printer messages (beginning on page 227
).
2 Print a new configuration page (page 314
).
3 Check the memory section on the configuration page and compare it to the
configuration page printed before the DIMM installation. If the amount of
memory has not increased, the DIMM might not be installed correctly
(repeat the installation procedure) or the DIMM might be defective (try a
new DIMM, or try installing the DIMM in a different slot).
Note If you installed a printer language (personality), check the Installed
Personalities and Options section on the configuration page. This area
should list the new printer language.