Filter
Top Products
Chapter 5 Problem Solving 265
Correcting Output Quality Problems
Display is blank and
internal fans are not
running.
Make sure that the printer power is on. Press all the keys to
see if one is stuck; contact your HP service representative if
this does not work.
Printer display is in the
wrong language or
displays unfamiliar
characters.
Reconfigure the control panel display language. See the
getting started guide, or press and hold S
ELECT
while
simultaneously pushing the power switch ON. Hold S
ELECT
until SELECT LANGUAGE appears, then release S
ELECT
. Use
the V
ALUE
- and V
ALUE
+ keys to select the desired language.
Press S
ELECT
to save your selection. Press G
O
. The control
panel display will indicate the printer is ready to use. If the
new language does not appear in the display, you may not
have pressed S
ELECT
to save your new selection.
Blank or Garbled Control Panel Display (continued)
Situation Solution