Filter
Top Products
4. If you have more pages to scan, press 1 to select Yes, and then repeat step 3 for each page of the
fax job.
-or-
If you are finished, press 2 to select No, and then go to the next step.
5. When all pages are scanned into memory, begin dialing. The product dials the number as you
press each digit. This allows you to wait for pauses, dial tones, international access tones, or calling
card acceptance tones before continuing to dial.
Send a fax to a group manually (ad hoc faxing)
Use the following instructions to send a fax to a group of recipients that has not been assigned a group-
dial entry:
1. Load the document into the automatic document feeder (ADF) input tray or on the flatbed scanner.
2. Use the alphanumeric buttons.
-or-
If the fax number that you are calling has been assigned a speed-dial entry, press Phone Book,
use the alphanumeric buttons to specify the speed-dial entry, and then press OK.
3. Press OK.
4. To continue dialing numbers, repeat steps 2 and 3.
-or-
If you are finished dialing numbers, go to the next step.
5. Press Start Fax. If the pages that you want to send are in the ADF, then faxing begins automatically.
6. If the product ADF sensor detects that no document is loaded into the ADF input tray, Send from
glass? 1=Yes 2=No appears on the control-panel display. To send the fax from the flatbed
scanner, press 1 to select Yes, and then press OK.
After you press OK, Load page: X Press OK appears on the control-panel display..
7. If you have already placed the document on the flatbed scanner, press OK (or place the document
on the flatbed scanner and then press OK).
After scanning the page, Another page? 1=Yes 2=No appears on the control-panel display.
8. If you have more pages to scan, press 1 to select Yes, and then repeat step 7 for each page of the
fax job.
-or-
If you are finished, press 2 to select No.
The product sends the fax to each fax number. If a number in the group is busy or does not answer, the
product redials that number based on the redial setting. If all redial attempts fail, the product updates
the fax activity log by adding the error, and then it proceeds to the next number in the group.
ENWW Use fax 121